- Graphite Molds for Continuous Casting Machine
- 2017-12-28 16:38
- Graphite Molds For Continuous Casting Machine We can supply the graphite molds according to the drawing which is used specially for continuous casting machine , it works as the key part of caster and consumables,the factor is very important .We have diffe
- Forged Steel Bush for Shafts
- 2017-12-27 07:06
- Forged Steel Bush for Shafts We could provide all sizes of forged bush or sleeves for shafts or transportation rollers,the purpose is to prolong the lifetime of shafts or rolls Specifications the blank forging weight :1kg to 50 tons per piece the max diam
- Cast Iron Roll,Work Rolls for The Rougher Stands of Hot Strip Mills
- 2017-12-22 23:45
- Cast Iron Roll,Work Rolls for the Rougher Stands of Hot Strip Mills Cast Iron Roll are mainly divided into three kinds as below 1)Infinite chilled casting iron roll it works with fine intercrystalline graphite layer.Size, shape and distribution of graphit
- Roll Die for Cold Pilger Mill,Reasonable Design and Good Price
- 2017-11-29 22:56
- Roll Die for cold pilger mill,Reasonable Design And Good Price Process Flow Chart Extruded Brass/copper tube----input the machine feeder---clamping----- Machine working frame back and forth movement(1)----while the frame moves,the roller will do relative
- Forged Axle Shafts for Compressor or Transportation Device Etc
- 2017-11-11 03:03
- Forged Axle Shafts For Compressor Or Transportation Device Etc Our products mainly includes Drive Shaft,Step Shaft,Eccentric Shaft,Mandrel Bar,Press Machine Column,Metallurgy Long Axis,Generator Shaft,etc. 1.Size : Diameter max 1500mm ,weight is up to 30
- Graphite Crucible as Melting Furnace for Small Production
- 2017-11-07 20:16
- Graphite Crucible As Melting Furnace For Small Production Some clients production per year is not big ,maybe they only produce hundreds of tons per year .so the induction furnace is too big for them ,in this case,we will choose graphite crucible as meltin
- Vertical Casting Machine for 8mm-17mm Copper Rod
- 2017-11-06 18:03
- Vertical Casting Machine For 8mm-17mm Copper Rod Uses: the vertical casting machine can be used to produce 8-22mm copper rod or copper tube . Main specifications Composition :melting furnace ,holding furnace ,tractor ,cutting machine ,coiling machine,hydr
- Forged Pipe Molds for Ductile Cast Iron Pipes
- 2017-10-27 18:59
- Forged Pipe Molds For Ductile Cast Iron Pipes We could produce high quality pipe molds at the support of water press (1500 tons,4500 tons ,6000tons) ,heat treatment furnace and all kinds of machining lathes(2000mm,1600mm and 1250mm) . After the finish of
- Centrifugal Casting Bush for Aluminum Cold Rolling Mill
- 2017-10-20 03:24
- Centrifugal Casting Bush For Aluminum Cold Rolling Mill The cold rolling mill steel bush is mainly used for aluminum foils,plates and stainless foilsplates coiling .we can supply the steel bush size from Ф110 to Ф1000mm ,the most suitable material will be
- Guide Shoes for Seamless Pipe Piercing Mill and Hot Rolling Mill
- 2017-08-23 21:35
- Guide Shoes For Seamless Pipe Piercing Mill And Hot Rolling Mill We are your specialist for solutions in special steel- and steel castings which is used in steel pipe industries .We not only supply guide discs,but also supply other wearing parts like the
- Cast Steel Roll for The Finishing Stand of Hot Strip Mills
- 2017-08-15 23:54
- Cast Steel Roll for the Finishing Stand of Hot Strip Mills The cast steel rolls are divided into three kinds too as the below 1）alloys steel cast rolls Chemical composition(%) Properties and application 2)hot work tool steel cast rolls Chemical compositio
- Forged Block for Tool, Valve Body and Oil Blowout Preventer Etc
- 2017-07-29 23:05
- Forged Block for Tool, Valve Body And Oil blowout preventor etc we forges quality blocks from the finest materials to serve multi applications and many different industries. This forging process yields greater impact and direction strength compared to pla
- Drawing Machine for Copper Round Wire,Flat Wire or Aluminum Wire
- 2017-07-25 16:48
- Drawing Machine For Copper Round Wire,Flat Wire or Aluminum Wire Copper rod breakdown machine specifications Intermediate wire drawing machine for copper specifications Fine wire drawing machine Input wire size:1.0-1.8 Output wire size:0.08-0.5mm accordin
